Air Flow Measuring Devices-Gas Flow Measurement Devices-Flow Meter

Model NO.: LZB_3 0.15-1.5 Size: Dn1.5~Dn200 Type: Coriolis Mass Flow Meter Measuring Principle: Atomic Physics Output Signal: 4-20mA, Pulse, RS485, Hart Fluid Types: Two-Phase Flow, Three-Phase Flow Specification: sgs, iso HS Code: 90261000 Accuracy: ±0.2%~±0.15%, ±0.2-0.5% Sensor: Tube/Flange Measuring Media: Liquid Flow Fluid Measured: Liquid, Air, Solid Flow Indicate: Flow Rate, Total Flow, Density, Temperature Trademark: U-ideal Origin: Tianjin, China Air Flow Measuring Devices-Gas Flow Measurement Devices-flow meter
can be used for measure volume flow of liquid or air, example air flow measuring, water flow test, diesel Oil Flow Meter.

I. Main technical parameters
(1) Measurement scope: 2kg/h~500t/h
(2) Accuracy: ± 0.2%~± 0.15%
(3) Work pressure: (0~32) MPa (in case of other high pressure, it must be of special order)
(4) Medium temperature: -50º C~ +350º C,
Measurement accuracy: ± 1º C
(5) Environment temperature: -20º C ~ +70º C
(6) Measurement medium: Liquid, gas, solid, or two phases and three phases mixed fluid
(7) Output signal:
4-20mA current signal of flow, with load resistance ≤ 500Ω
0-10kHz frequency signal of flow.
RS485 Communication protocol
Hart protocol
(8) Power supply voltage: 24VDC
(9) Measurement of measuring pipe: 316L stainless steel
(10) Response time: 0.1s~5s, adjustable
(11) Explosion-proof grade: Ex(ib)II BT2-T5

Model	DN	Measurement scope ( kg/h )	Work Pressure  ( MPa )	Connection type (mm)
DMF-1-1-AB	1.5	0~4	0~32	Weld Joints Φ6×1.5
DMF-1-1-A	3	0~40	0~32	Weld Joints Φ6×1.5
DMF-1-1-B	6	0~100	0~25	Weld Joints Φ10×2
DMF-1-2-A	8	0~200	0~20	Weld Joints Φ10×1

                                                                                                                                                                                                 

Model	DN	Measurement scope (kg/h)	Work Pressure (MPa)	Connection Type(mm)
DMF-1-3-A	12	0~500	0~4	Weld Joints Φ18×3
	12	0~500	0~25	Weld Joints Φ20×4
DMF-1-3-B	14	0~1000	0~4	Weld Joints Φ18×2
	14	0~1000	0~25	Weld Joints Φ20×3
DMF-1-4	16	0~3000	0~4	Weld Joints Φ18×1
	16	0~3000	0~25	Weld Joints Φ20×2

Model	DN	Measurement scope (t/h)	Work Pressure (MPa)	Connection Type(mm)
DMF-1-5-A	25	0-10	0~4	Flange 25
DMF-1-5-B	40	0-20	0~4	Flange 40
DMF-1-6-A	50	0-30	0~4	Flange 50
DMF-1-6-AB	65	0-50	0~4	Flange 65
DMF-1-6-B	80	0-100	0~4	Flange 80
DMF-1-6-C	100	0-150	0~4	Flange 100
DMF-1-6-D	150	0-300	0~2	Flange 150
DMF-1-6-E	200	0-500	0~2	Flange 150

Contact us if you need more details on Air Flow Measuring Devices. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Density Measurement Device、Gas Flow Measurement Devices. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : mass flowmeter