Piston Type Solenoid Valve; Water/Steam Solenoid Valve
Model No.: Piston Solenoid Valve
Solenoid Valve Standard technical parameters
The high pressure solenoid valve according to the structure is divided into pilot piston and zero pressure differential direct acting control type. Flow size is less than 2.5 for direct acting type and the flow size in 8-25 as the pilot type. The body material as: wrought brass and stainless steel. Mainly used in industry gas, high pressure gas and liquid etc.
Interface size: 1/8-1''
Flow diameter: Normally closed type: 1-25mm
Body material: Wrought brass, 304, 316
Connection type: G thread
Pressure class: 0-100bar
Structure type: 1-2.5mm for direct acting type
8-25mm for pilot type
Control type: Normally closed
Seal material: VITON
Medium temperature: 0-100C
Ambient temperature: 0-65C
Install way: According to the body tag to install, in order to enhance the valve service life, better coil upward, horizontal installation;
Coil voltage:AC24V/110V/220V/230V/240V 50/60HZ DC24V/12V ±10% fluctuation allowed
2)Life time: 1 million
Air, water,steam etc.
NBR: -10°C to 80 °C
EPDM: -10°C to 120 °C
VITON:-10°C to 150 °C
PTFE seal :-20°C to 200 °C
S91B,22VA(AC),17W(DC) IP 65,100% ED
Latching coil:DC6-24V as requested
Body- brass or stainless steel
Amature tube-stainless steel 304
Stop-stainless steel 430F
Shading rings- stainless steel 304
Contact us if you need more details on Solenoid Valve. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water Solenoid Valve、Steam Solenoid Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.